We offer resources for building decision makers, including white papers, manuals and other technical resources.
Resources
ATAS Articles
Drained/Back Ventilated Rainscreen Systems
Effective Protection Against the Elements of Nature
by Christopher Kroeter, CSI, CDT, LEED Green Associate and Daniel Arnold
August 17, 2016
ATAS Tech Tips
Tech Tips:
Dutch Seam Installation Detail
Installing Dutch Seam from the center of the roof plane.
Factory Pre-Notched Trims
When to use factory pre-notched trims.
Installation Tips for High Wind Regions
Install tips for meeting the greater uplift requirements in high wind regions.
Metals in Marine Environments
How does a metal roof withstand the sea air?
Metal Roofing and Lightning
What are the affects of lightning on metal roofing?
Proper Attic Ventilation
Attic ventilation tips for metal roofing systems.
Proper Bend Radius
How to properly bend metal
Roll Forming Post-Cut or Pre-Cut
Advantages and disadvantages on architectural metal panels
Slopes & Angles
A Courtesy to the Roofing Industry: Charts for Planning
Sound Emissions on Metal Roofing
How quiet is a metal roof? You may be surprised.
Understanding Copper
Considerations to be taken when working with copper.
Wall Panel Installation Detail
How to properly install a wall panel to allow for movement.
Wind Uplift
Testing for wind uplift on a metal roof.
Wall Trim Transition Details
Roof Trim Transition Details
Florida Building Code Approvals
Industry Technical Papers: Metal Roofs
In addition to these resources, we also offer a wide range of AIA approved continuing education courses.
Best Practices in Lightning Protection and Metal Construction
Originally published by the MCA on 3/2019
Service Life Assessment of Low-Slope Unpainted 55% Al-Zn Alloy Coated Steel Standing Seam Metal Roof Systems | Full Report
Originally published by the MCA on 10/2018
Service Life Assessment of Low-Slope Unpainted 55% Al-Zn Alloy Coated Steel Standing Seam Metal Roof Systems | Executive Summary
Originally published by the MCA on 10/2018
Snow Retention
Originally published by the MCA on 6/2018
Lightning and Metal Roofing
Originally published by the MCA on 6/2018
Dissimilar Metal Corrosion in Roofing Installations
Originally published by the MCA on 6/2016
Roof Seaming Best Practices Guide
Originally published by the MCA on 8/2015
Metal Roof Design for Cold Climates
Originally published by the MCA on 5/2014
Industry Technical Papers: Metal Walls
In addition to these resources, we also offer a wide range of AIA approved continuing education courses.
Is My Exterior Wall Material Truly Noncombustible?
Originally published by the MCA on 06/2020
Preformed Metal Panel Installation Guide
Originally published by the MCA on 7/2017
Understanding Rainscreen Wall Systems
Originally published by the MCA on 1/2022
Visual Appearance Parameters for Single-Skin Panel Systems
Originally published by the MCA on 10/2016
Industry Technical Papers: IMP's
In addition to these resources, we also offer a wide range of AIA approved continuing education courses.
IMP Visual Inspection Guide
Originally published by the MCA on 11/2017
Selection Guideline for Insulated Metal Panels
Originally published by the MCA on 10/2017
Industry Technical Papers: Retrofit
In addition to these resources, we also offer a wide range of AIA approved continuing education courses.
Comparison of Retrofit Systems Over Existing Metal Roofs
Originally published by the MCA on 4/2017
White Paper - Benefits of Retrofit Roofing
Originally published by the MCA on 8/2016
Industry Technical Papers: Other
In addition to these resources, we also offer a wide range of AIA approved continuing education courses.
Material Properties that Affect Steel Cladding Performance
Originally published by the MCA in 2021
Best Practices: Metal Building Sealant Types and Application Guidelines
Originally published by the MCA on 06/2020
Fastener Compatibility with Profiled Metal Roof and Wall Panels
Originally published by the MCA on 06/2020
Metal Roof and Wall Panel Components in Contact with Preservative-Treated Lumber
Originally published by the MCA on 7/2019
Proper Tools for Fastening Metal Panels
Originally published by the MCA on 3/2019
THE DOCTOR HAS CALLED IN A PRESCRIPTION FOR YOU: Prescriptive Requirements vs. Performance-Based Testing in the Construction Market
Originally published by the National Coil Coating Association (NCCA) and NCCA Technical Director, David Cocuzzi | January 15, 2019
Oil Canning in Metal Roof and Metal Wall Systems
Originally published by the MCA in 2018