EDUCATION > Did You Know? > Roofing > PC System

PC System

snap-on-standing-batten-seam-metal-roof-th.jpgUsed in straight, tapered, and curved applications, the sky is the limit with PC System.

The PC systems consist of three parts, the pan, a separate seam or batten and clips. The seam is snapped over the clips concealing the fastening system. With the batten style, the system is installed with a spacer clip and is snapped in place.

The PC systems are non structural panels and must be applied to a solid substrate with a recommended minimum slope of 3:12.

Convex or concave applications are available in standing seam style only.

  • Standard Offerings
    • .032 and .040 aluminum
    • 24 ga. metallic coated steel
  • Special Offerings
    • 16 & 20 oz. copper
    • Zinc
    • Laminates
    • Acrylic coated Galvalume®
  • Concealed fasteners
  • Compound curving
  • Allows for symmetrical panel installation
  • Variable pan width
  • Pan and seam or batten may be mixed and matched with colors
  • Simplistic design allows for design flexibility
  • Often used as an accent with conventional standing seam offerings
  • Fire resistant
  • PVDF coating system