ATAS is an AIA/CES, GBCI, and IIBEC Continuing Education Provider
Qualified instructors conduct the seminars and encourage a question and answer session. Training can be held at an architect’s office, an industry association chapter meeting (such as AIA, CSI or USGBC), or at another convenient location. All courses are approved by the AIA/CES for 1 LU/HSW, four of the courses are approved by the GBCI for 1 CE hour, and ten of the courses are approved by IIBEC by 1 CEH.
If your office cannot hold a large group, or you would like to combine the seminar with other firms, ATAS will rent a meeting room at a hotel or other large gathering space to accommodate groups of 20 people and over.
ATAS offers four online education courses. “Using Technologically Advanced Metal Building Products in LEED, Net Zero, and Passive Buildings” is approved for both 1 AIA/CES LU/HSW and 1 GBCI CE Hour. “Testing and Specifying Metal Roofs in High Wind Areas,” “Designing with Metal Wall Panels,” and “Metal Roofing: History, Material, and Application” are all approved for both 1 AIA/CES LU/HSW and 1 IIBEC CEH. All four courses are available below.
We can also provide any of our in-person seminars as a Virtual Lunch & Learn. Please fill out the request a seminar form, and note in the comments section that you would like the seminar to be presented remotely.
ATAS provides two plant tours for AIA learning units. Participants in the Morrisville, PA plant tour will experience the processes involved in the coating of metal coils. The plant tour held in Allentown, PA or Mesa, AZ provides a learning experience in manufacturing of metal components for building envelopes. Both plant tours are approved by the AIA/CES for 1.5 LU/HSW.
Course Titles and Learning Objectives
Testing and Specifying Metal Roofs in High Wind Areas | AIA & IIBEC Approved
1 LU/HSW & 1 IIBEC CEH
- Identify the types of metal roof panels and their performance capabilities, as well as the key test methods used to evaluate these systems for wind resistance impacting occupants’ safety and security.
- Utilize other important roofing tests and code requirements for metal roof and perimeter edge systems.
- Analyze the effects of high winds on the roof and building envelope, and common causes of failure due to inadequate installation.
- Optimize metal roofing specifications for enhanced durability and occupant safety based upon testing data and real world performance.
- Gather best practices for ensuring durable and secure roofing designs gleaned from experience in the field and working closely with metal roofing manufacturers.
Using Technologically Advanced Metal Building Products in LEED, Net Zero, and Passive Buildings | AIA & GBCI Approved
1 LU/HSW & 1 GBCI CE Hour
- Understand the basic design principles behind LEED, Net Zero, and Passive House buildings.
- Examine how technologically advanced metal siding and roofing products can be used in sustainable building design.
- Discover how these innovative metal building technologies can help projects meet LEED, Net Zero, and Passive House standards.
- Explore case studies where metal building products were used to meet green building standards in both commercial and residential projects
Designing with Metal Wall Panels | AIA & IIBEC Approved
Provider # J447 | AIA/CES Course # DMW0923 | 1 LU/HSW & 1 IIBEC CEH
- Define metal wall panel substrates and coating
- Explain the basic requirements of a wall assembly
- Describe the different types of metal wall panels
- Understand the basic detailing and flashing components
Metal Roofing: History, Material, and Application | AIA & IIBEC Approved
Provider # J447 | AIA/CES Course # MRH0322 | 1 LU/HSW & 1 IIBEC CEH
- Observe and recognize the history of metal roofing and the different types of metal used
- Explain the manufacturing process and the importance of finish coatings
- Describe the difference between low slope roof systems and steep slope roof systems
- Understand the environmental benefits, sustainable technology and the features of metal roofing
Demystifying Rain Screen Concepts Utilizing Metal Wall Panels | AIA & IIBEC Approved
Provider # J447 | AIA/CES Course # DRS0220 | 1 LU/HSW & 1 IIBEC CEH
- Understand various types of rain screen wall systems
- Identify importance of critical nature of air and water resistance barriers in energy efficiency
- Discover and define the importance of integrating continuous insulation
- Simplifying energy efficiency of rain screens utilizing insulated metal panels
Design & Testing of Perimeter Edge Metal for Low-Slope Commercial Roofs | AIA & IIBEC Approved
Provider # J447 | AIA/CES Course # PEM0322 | 1 LU/HSW & 1 IIBEC CEH
- Identify on drawings or in the field the three roof conditions that utilize perimeter edge metal, and name the ANSI/SPRI standards written for those conditions
- Use ANSI/SPRI ES-1 to calculate the vertical and horizontal negative pressures on perimeter edge due to wind
- Specify in Division 7, Thermal and Moisture Protection, the three perimeter edge metal test methods required by code (IBC)
- Recognize, when designing or specifying perimeter edge metal, three common perimeter edge metal design and installation errors, and explain how they can be avoided
Designing for the Effects of Wind on a Building – Tests and Reality | AIA & IIBEC Approved
Provider # J447 | AIA/CES Course # DEW0122 | 1 LU/HSW & 1 IIBEC CEH
- Identify the types of metal roof panels and their performance capabilities and understand the test methods established for metal roof panels
- Create specifications that identify the proper test methods to be included for the various roof products, styles and application
- Recognize proper code requirements for metal roof systems and perimeter edge systems
- Discover how actual field performance of products relates to test methods and procedures, and implement best practices
Insulated Metal Panels – Creating the Perfect All-In-One Barrier Back Up Wall System | AIA, GBCI & IIBEC Approved
Provider # J447 | AIA/CES Course # BBU0622 | GBCI Course # 0920025869 | 1 LU/HSW, 1 GBCI CE Hour & 1 IIBEC CEH
- Recognize the key elements of the perfect wall and understand how the primary control layers enhance a building’s sustainable design
- Identify the different types of wall assemblies and understand the energy efficiency of each
- Review the different components and performance of an Insulated Metal Panel Barrier Back Up Wall System and recognize how they contribute to green building and energy savings
- Identify the key benefits, including thermal performance, of an Insulated Metal Panel Barrier Back Up Wall System
- Distinguish Green Building / LEED contributors of an Insulated Metal Panel Barrier Back Up Wall System
Insulated Metal Wall and Roof Panels – High Performing Systems in Design, Sustainability, and Operation | AIA, GBCI & IIBEC Approved
Provider # J447 | AIA/CES Course # IMP0522 | GBCI Course # 0920026254 | 1 LU/HSW, 1 GBCI CE Hour & 1 IIBEC CEH
- Have a better understanding of insulated metal panels and components
- Explain how insulated metal panels prevent air and vapor infiltration, increase thermal comfort for building occupants and improve building performance through increased energy efficiencies.
- Compare insulated metal panels to traditional systems based on attributes, aesthetics, and sustainable performance.
- Recognize the durability, thermal performance and energy efficiencies gained when using insulated metal panels vs. traditional systems and how they reduce their environmental impact.
- Understand the criteria, attributes and sustainability benefits of insulated metal panels and how they may qualify for credits under LEED (Leadership in Energy and Environmental Design).
Interior Acoustics and Sound Control Using Metal Panels | AIA Approved
Provider # J447 | AIA/CES Course # IAS0322 | 1 LU/HSW | 1 IDCEC CEU
- Define sound and its physical properties, and identify how sound travels and interacts through a typical space
- Examine the history of architectural acoustics, and utilize Wallace Sabine’s formula to convert Sabins in order to meet a specific area’s need for acoustical sound control
- Understand Noise Reduction Coefficients (NRC), Ceiling Attenuation Class (CAC), Sound Transmission Class (STC), and how each helps in acoustical sound control
Metal Coil Coating Technology – Processing and Performance of Prepainted Metal in the Building Products Industry | AIA & IIBEC Approved
Provider # J447 | AIA/CES Course # MCT0422 | 1 LU/HSW & 1 IIBEC CEH
- Understand how a continuous coil coating line operates and the different processes which are involved
- Recognize the importance of proper cleaning, pretreatment, primer and paint to achieve a quality coated metal coil
- Discover the different test methods that are employed for quality control in the coil coating process
- Realize the advantages that prepainted metal offers, including the energy and environmental benefits
Solar Air Heating | AIA, GBCI & IIBEC Approved
Provider # J447 | AIA/CES Course # SAH0622 | GBCI Course # 0920026263 | 1 LU/HSW, 1 GBCI CE Hour & 1 IIBEC CEH
- Understand solar air heating principles and how they contribute to a sustainable building
- Explain how energy efficient transpired solar collectors function and the design considerations
- Learn how outside ventilation air is preheated and brought into a building, improving indoor air quality
- Realize the carbon-reduction of a building with the use of transpired solar collectors considerations for feasibility
- Describe the system components and installation for a transpired solar collector
Sustainable Building Envelopes | AIA, GBCI, & IIBEC Approved
Provider # J447 | AIA/CES Course #SBE0222 | GBCI Course # 0920025480 | 1 LU/HSW, 1 GBCI CE Hour & 1 IIBEC CEH
- Learn how the use of metal as a cladding component may contribute to carbon neutral and net zero building goals
- Learn how metal walls can use sunlight to provide the building with solar air heating
- Discover how metal cladding on roof and walls can contribute to green building objectives, including LEED Certification
- Explore cutting edge cool roof technologies, including UV reflective pigments and above sheathing ventilation
- Understand how metal roofing can provide a solar ready platform for photovoltaic systems
Today’s Architectural Metals for the Interior World | AIA Approved
Provider # J447 | AIA/CES Course # TAM0423 1 LU/HSW | 1 IDCEC CEU
- Examine the cost effectiveness of aluminum, as well as its sustainable nature and green attributes.
- Understand the options of colors and textures available in today’s architectural metals.
- Illustrate creative intuitive metal usage in walls, ceilings, and accents replacing old construction methods.
- Explore how metal can enhance an interior environment with beauty, strength, and resilience.
Plant Tours and Objectives
Plant Tour of a Facility which Manufactures Building Envelope Components from Metal | AIA Approved
Provider # J447 | AIA/CES Course # PTM0222 | 1.5 LU/HSW
Tour Held in Allentown, PA or Mesa, AZ
Participants in this plant tour will experience first-hand the processes in which metal components for the building envelope are manufactured.
- Discover several types of metal used to create building envelope components, and understand the processes of metal roll forming, metal stamping and custom forming metal on a brake, to create a variety of different profiles and shapes.
- Identify the importance of precision leveling metal prior to forming it into panel profiles, to eliminate the metal memory and to alleviate stressing of the metal in the roll forming process.
- Recognize the differences of factory-formed metal panels versus those which are formed at the job site, by viewing the process of slowly forming metal through many forming stations, within a quality controlled environment.
- Realize the customization that can be achieved within the metal forming processes to obtain particular aesthetics, to create ease of installation or to provide a solution to a project challenge. As well, understand how to integrate sustainable technologies into building construction and renovation using metal panel systems.
Plant Tour of a Metal Coil Coating Facility | AIA Approved
Provider # J447 | AIA/CES Course # PTC0222 | 1.5 LU/HSW
Tour will be held in Morrisville, PA
Participants in this plant tour will experience first-hand the processes involved in the coating of metal coils.
- Identify the importance of proper cleaning, pretreatment, primer and paint to achieve a quality coated metal coil which can then be used to manufacture architectural metal panels.
- Understand the differences between wet chemistry pretreatments and dry-in-place pretreatments of metal in the coil coating process.
- Discover the different types of industries that use coil coated metal in the manufacturing of their products, including architectural metal panels for the building envelope.
- Realize the design ideas that can be achieved within the coil coating process to obtain particular aesthetics for the building envelope, with a variety of colors, print coats and laminates.